COFULUX- INVEST S.A.

For more Information

ENSAGREEN is a new liquid heat transfer medium for heating and cooling systems. „Before using ENSAGREEN, we had a daily consumption of 110 cubic meters of fuel, now with ENSAGREEN we use only 80 cubic meters, which is a saving of 27%.“ Levent. Albayrak, General Director, TCDD Foundation for the State Railway Lines of the Turkish Republic ENSAGREEN REDUCES ENERGY COSTS UP TO 30% When subjected to a heat source, a thermo-chemical reaction is triggered in ENSAGREEN that further increases its energy. As a result, ENSAGREEN not only heats up quicker but also cools off slower than water and can give off heat to its environment earlier and longer. In effect, ENSAGREEN reduces fuel consumption, unnecessary system-losses and leads to an overall better result with equal system performance. ENSAGREEN 4-LAYER PROTECTION FROM CORROSION, CALCIFICATION, BACTERIA AND FREEZING UP TO –63°C The premium substances of ENSAGREEN provide effective protection against unnecessary energy losses and high cost of repairs from limestone, rust or siltation. Even burst pipes caused by freezing are effectively prevented. „By using ENSAGREEN we have profited a lot, and we furthermore prevented the monthly loss of 800 to 1000 pieces of product due to heating coil malfunctions, which increased our annual production by a total of 10.000 pieces“ Murat Albuz, Foundry Director, Ceramics Factory Canakcilar-Creavit Incorporated ENSAGREEN FOR ALL HEATING AND COOLING SYSTEMS ENSAGREEN is a clear liquid that is applicable as an additive to heating water in all closed-circuit heat transfer systems (heating systems, solar thermal systems, heat pumps, etc). The recommended mixing ratio for maximum saving and protection in typical natural gas heating systems is 60% water and 40% ENSAGREEN . „The fact, that x-energy is heated much faster compared to water and cools down much slower, shows that the use of ENSAGREEN in heating systems will provide substantial energy savings.“ Dr. Bülent Oktay Akkoyunlu, Marmara University Istanbul ENSAGREEN ENVIRONMENTALLY FRIENDLY AND BIODEGRADABLE ENSAGREEN helps to protect the environment and to lower CO2 emissions by its energy saving potential. All its substances are biodegradable, nontoxic and environmentally friendly. ENSAGREEN 5+ YEARS MANUFACTURER'S WARRANTY ENSAGREEN has a 5 years warranty from its manufacturer Özen Kimya to prevent freezing, calcification and corrosion, and to provide fuel saving, as long as there is no leakage in the system. Conditional on fulfillment of all periodical inspections and repairs as per local laws and regulations, the guaranty cover can be respectively extended. Your installation is of course covered by our insurance.
ENSAGREEN is a new liquid heat transfer medium for heating and cooling systems. „Before using ENSAGREEN, we had a daily consumption of 110 cubic meters of fuel, now with ENSAGREEN we use only 80 cubic meters, which is a saving of 27%.“ Levent. Albayrak, General Director, TCDD Foundation for the State Railway Lines of the Turkish Republic ENSAGREEN REDUCES ENERGY COSTS UP TO 30% When subjected to a heat source, a thermo-chemical reaction is triggered in ENSAGREEN that further increases its energy. As a result, ENSAGREEN not only heats up quicker but also cools off slower than water and can give off heat to its environment earlier and longer. In effect, ENSAGREEN reduces fuel consumption, unnecessary system-losses and leads to an overall better result with equal system performance. ENSAGREEN 4-LAYER PROTECTION FROM CORROSION, CALCIFICATION, BACTERIA AND FREEZING UP TO –63°C The premium substances of ENSAGREEN provide effective protection against unnecessary energy losses and high cost of repairs from limestone, rust or siltation. Even burst pipes caused by freezing are effectively prevented. „By using ENSAGREEN we have profited a lot, and we furthermore prevented the monthly loss of 800 to 1000 pieces of product due to heating coil malfunctions, which increased our annual production by a total of 10.000 pieces“ Murat Albuz, Foundry Director, Ceramics Factory Canakcilar-Creavit Incorporated ENSAGREEN FOR ALL HEATING AND COOLING SYSTEMS ENSAGREEN is a clear liquid that is applicable as an additive to heating water in all closed-circuit heat transfer systems (heating systems, solar thermal systems, heat pumps, etc). The recommended mixing ratio for maximum saving and protection in typical natural gas heating systems is 60% water and 40% ENSAGREEN . „The fact, that x-energy is heated much faster compared to water and cools down much slower, shows that the use of ENSAGREEN in heating systems will provide substantial energy savings.“ Dr. Bülent Oktay Akkoyunlu, Marmara University Istanbul ENSAGREEN ENVIRONMENTALLY FRIENDLY AND BIODEGRADABLE ENSAGREEN helps to protect the environment and to lower CO2 emissions by its energy saving potential. All its substances are biodegradable, nontoxic and environmentally friendly. ENSAGREEN 5+ YEARS MANUFACTURER'S WARRANTY ENSAGREEN has a 5 years warranty from its manufacturer Özen Kimya to prevent freezing, calcification and corrosion, and to provide fuel saving, as long as there is no leakage in the system. Conditional on fulfillment of all periodical inspections and repairs as per local laws and regulations, the guaranty cover can be respectively extended. Your installation is of course covered by our insurance.
Click Here Click Here